ARCTIC MX-7 4g Thermal Paste – High-Performance CPU and GPU Cooling
The ARCTIC MX-7 4g Thermal Paste is a premium thermal compound developed for effective heat transfer between heat-generating components and their cooling solutions. Designed for desktop processors, graphics cards, laptops, and compatible gaming consoles, MX-7 combines a high-filler formulation with excellent thermal interface stability.
Its dense, viscous consistency helps create a thin, uniform layer under cooler mounting pressure, filling microscopic gaps between contact surfaces to improve thermal transfer.
Whether you’re building a new gaming PC, upgrading your cooling system, or maintaining an existing computer, ARCTIC MX-7 provides a reliable thermal interface for demanding cooling applications.
Key Features of ARCTIC MX-7 Thermal Paste
- High-Filler Thermal Formula: Dense, viscous consistency designed for effective heat transfer between components and heatsinks.
- Pump-Out Resistance: High cohesion helps reduce displacement of thermal paste during repeated heating and cooling cycles.
- Long-Term Stability: Formulated to maintain consistent thermal performance without premature drying.
- Electrically Non-Conductive: Non-capacitive formula helps reduce electrical risks associated with accidental paste contact.
- Thin, Even Application: Mounting pressure distributes the compound across the cooling surface for consistent contact.
- Versatile Compatibility: Suitable for CPUs, GPUs, laptops, and compatible console processors.
- Convenient 4g Syringe: Provides controlled dispensing for system builds, upgrades, and maintenance.
Technical Specifications
| Specification | Details |
|---|---|
| Manufacturer | ARCTIC |
| Model | MX-7 |
| Manufacturer Part Number | ACTCP00090A |
| EAN / GTIN | 4895265000874 |
| UPC | 840033403542 |
| Net Weight | 4 grams |
| Color | Gray |
| Viscosity | 35,000–38,000 poise |
| Density | 2.9 g/cm³ |
| Continuous Use Temperature | −50°C to 250°C |
| Volume Resistivity | 1.7 × 10¹² Ω·cm |
| Dielectric Strength | 4.2 kV/mm |
| Electrical Conductivity | Electrically non-conductive |
| Application Method | Cross pattern |
How to Apply ARCTIC MX-7 Thermal Paste
ARCTIC MX-7 has a thicker consistency than many conventional thermal pastes. The manufacturer recommends allowing the cooler’s mounting pressure to spread the paste rather than manually distributing it with a spatula.
For installation:
- Clean the Contact Surfaces: Remove existing thermal paste from the processor and heatsink using an appropriate cleaning product.
- Apply a Cross Pattern: Dispense MX-7 onto the processor’s heat spreader in a cross pattern, following ARCTIC’s application guidance.
- Install the Cooler: Carefully position the heatsink or water block over the processor.
- Secure Evenly: Tighten the cooler according to its installation instructions, allowing mounting pressure to spread the paste.
- Check Installation: Ensure the cooler is properly secured and connected before operating the system.
For GPU and other nonstandard cooling applications, follow the component manufacturer’s specific thermal interface and installation requirements.
Designed to Resist the Pump-Out Effect
During normal system operation, processors repeatedly heat up and cool down. These temperature fluctuations can cause some thermal compounds to migrate away from the contact area over time.
ARCTIC designed MX-7 with a cohesive formula intended to resist this pump-out effect and maintain consistent thermal interface performance over repeated thermal cycles.
This makes it a practical option for systems that experience frequent temperature changes during gaming, rendering, or other demanding workloads.
Frequently Asked Questions
Is ARCTIC MX-7 suitable for CPUs and GPUs?
Yes. ARCTIC identifies CPUs, GPUs, laptops, and console processors as supported applications. Always follow the applicable component manufacturer’s installation guidance.
Is ARCTIC MX-7 electrically conductive?
No. MX-7 is electrically non-conductive and non-capacitive, helping reduce the risk of electrical problems from accidental contact.
Should I spread MX-7 with a spatula?
No. ARCTIC recommends a cross-pattern application followed by even cooler mounting pressure. The paste’s high viscosity makes traditional spatula spreading unsuitable.
Does ARCTIC MX-7 require a special cooler?
No. It is designed for use with compatible CPU and GPU cooling solutions, including air coolers and liquid cooling water blocks.
Does this package include MX Cleaner wipes?
No. This listing is for the standard 4g thermal paste syringe. ARCTIC offers a separate package with MX Cleaner wipes.
How much thermal paste is included?
This product contains 4 grams of ARCTIC MX-7 thermal compound in a resealable syringe.
Reliable Thermal Performance for Your Next Build
The ARCTIC MX-7 4g Thermal Paste combines a dense, high-performance thermal formulation with electrical safety and resistance to thermal cycling.
It’s a practical thermal interface solution for PC builders, gamers, cooling enthusiasts, and technicians maintaining compatible CPU and GPU cooling systems.














Reviews
There are no reviews yet.